OpenR66 Server Configuration File

config

• comment:string Optional

identity

• hostid:nonEmptyString

  Host ID in NON SSL mode

• sslhostid:nonEmptyString Optional

  Host ID in SSL mode

• cryptokey:Des-File

  Des CryptoKey File containing the key in Des mode for R66 passwords

• authentfile:XML-File Optional

  Authentication File containing Authentications for partners

server

• serveradmin:nonEmptyString

  Username for Administrator access

• serverpasswd:nonEmptyString

  Password for Administrator access using Crypto Key

• usenossl:booleanType default="True"

  True (Default) if R66 will allow no SSL mode connection

• usessl:booleanType default="False"

  True if R66 will allow SSL mode connection

• usehttpcomp:booleanType default="False"

  True if Administrator (HTTPS) will allow HTTP compression

• uselocalexec:booleanType default="False"

  By default, use the System.exec() but can lead to limitation in performances (JDK limitation). The usage of the GoldenGate LocalExec Daemin tends to reach better performances through execution delegation

• lexecaddr:address default="127.0.0.1" Optional

  Address of LocalExec Daemon

• lexecport:nonNulInteger default="9999" Optional

  Port of LocalExec Daemon

• httpadmin:directoryType

  Home Directory for HTTPS file support for Administrator

• admkeypath:JKS-File

  JKS HTTP KeyStore for Administrator Access in HTTPS Mode (containing Server Certificate)

• admkeystorepass:nonEmptyString

  Password for the HTTP KeyStore

• admkeypass:nonEmptyString

  Password for the HTTP Server Certificate within the HTTP KeyStore

• checkaddress:booleanType default="False" Optional

  True if R66 will check remote IP address while accepting a new connection

• checkclientaddress:booleanType default="False" Optional

  True if R66 will check remote IP address also for remote Client

• multiplemonitors:nonNullInteger default="1"

  Set the number of servers that act in the same group as a single instance of OpenR66 File Transfer Monitor

network

• serverport:nonNulInteger default="6666"

  Port used in NON SSL mode

• serversslport:nonNulInteger Optional default="6667"

  Port used in SSL mode

• serverhttpport:nonNulInteger default="8066"

  Port used for monitoring in HTTP mode

• serverhttpsport:nonNulInteger default="8067"

  Port used for Administrator access in HTTPS mode

ssl Optional

• keypath:JKS-File

  JKS KeyStore for R66 Access in SSL Mode (containing Server Certificate)

• keystorepass:nonEmptyString

  Password for the KeyStore

• keypass:nonEmptyString

  Password for the Server Certificate within the KeyStore

• trustkeypath:JKS-File

  JKS Trust KeyStore for R66 Access in SSL Mode with Client Authentication (containing Client Certificate)

• trustkeystorepass:nonEmptyString

  Password for the Trust KeyStore

• trustuseclientauthenticate:booleanType default="False"

  True if R66 will only allow client through SSL authentication

directory

• serverhome:directoryType

  Home Directory for the OpenR66 Server (relative path to this Home)

• in:nonEmptyString Optional default="IN"

  Default Receive Directory

• out:nonEmptyString Optional default="OUT"

  Default Send Directory

• arch:nonEmptyString Optional default="ARCH"

  Default Archive Directory

• work:nonEmptyString Optional default="WORK"

  Default Working Directory

• conf:nonEmptyString Optional default="CONF"

  Configuration Directory

limit

• serverthread:nonNulInteger default="8" Optional

  Number of Threads on Server side (=Number of Cores)

• clientthread:nonNulInteger default="80" Optional

  Number of Threads on Client side (=10xServer)

• memorylimit:nonNulInteger default="4000000000" Optional

  Memory Limit for R66 Server Java Process

• sessionlimit:nonNegInteger default="8388608" Optional

  HBandwidth for one session (64Mb)

• globallimit:nonNegInteger default="67108864" Optional

  Global Bandwidth (512Mb)

• delaylimit:nonNulInteger default="10000" Optional

  Delay between 2 checks of Bandwidth (10s). The less this value, the better the bandwidth limitation is done. However take care to not give too low value

• runlimit:nonNulInteger default="10000" Optional

  Limite by batch of active transfers (10000)

• delaycommand:nonNulInteger default="5000" Optional

  Delay between 2 execution of the Commander (5s)

• delayretry:nonNulInteger default="30000" Optional

  Delay between 2 attemps in case of error (30s)

• timeoutcon:nonNulInteger default="30000" Optional

  Delay before a Time Out occurs (30s)

• blocksize:nonNulInteger default="65536" Optional

  Block size (64Ko). A value between 8 KB to 16 MB is recommanded

• gaprestart:nonNulInteger default="30" Optional

  Gap to use when restarting a transfer as gap x blocksize

• usenio:booleanType default="False" Optional

  Usage of NIO support for the files. According to the JDK, it can enhance the performances

• usecpulimit:booleanType default="False" Optional

  Usage of CPU Limitation when new request starts

• usejdkcpulimit:booleanType default="False" Optional

  Usage of CPU limitation based on Native JDK support, else (False) on Java Sysmon library

• cpulimit:decimalType default="0.0" Optional

  Usage of CPU limitation based on Native JDK support, else (False) on Java Sysmon library

• connlimit:nonNegInteger default="0" Optional

  Usage of CPU limitation based on Native JDK support, else (False) on Java Sysmon library

• digest:integerNotNegative default=0 (to setup a different Digest than MD5 globally)
• usefastmd5:booleanType default="True"

  Usage of FastMD5 library. The library greatly improves the performances for the MD5 computations

• fastmd5:SODLL-File Optional

  Library JNI Filepath. If the path is empty, the pure Java version will be used

• checkversion:booleanType Optional default="False"

  If True, it will enable extended protocol (>= 2.3) to enable some extra information getting back at end of transfers

db

• dbdriver:address

  4 types of database are currently supported: oracle, mysql, postgresql, h2

• dbserver:normString

  Connection to the database in JDBC mode (jdbc:type://[host:port]....). Use the database documentation to find the correct syntax for the JDBC connection

• dbuser:address

  Database User

• dbpasswd:nonEmptyString

  Database User's Password

• taskrunnernodb:booleanType Optional default="False"

  When server with no DB, do R66 will use XML files as permanent information on Transfer Tasks

business

• businessid:nonEmptyString

  the host ids (1 by 1) that will be allow to use Business Request (>= 2.3)

Example:

<?xml version="1.0" encoding="UTF-8"?>
<config xmlns:x0="http://www.w3.org/2001/XMLSchema">
    <comment>Example of config file: change its as your need.</comment>
    <identity>
        <hostid>hosta</hostid>
        <sslhostid>hostas</sslhostid>
        <cryptokey>D:\GG\R66\certs\test-key.des</cryptokey>
        <authentfile>D:\GG\R66\conf\OpenR66-authent-A.xml</authentfile>
    </identity>
    <server>
        <serveradmin>monadmin</serveradmin>
        <serverpasswd>c5f4876737cf351a</serverpasswd>
        <usenossl>True</usenossl>
        <usessl>False</usessl>
        <usehttpcomp>False</usehttpcomp>
        <uselocalexec>False</uselocalexec>
        <httpadmin>D:\NEWSOURCE\GoldenGateR66\src\main\admin</httpadmin>
        <admkeypath>D:\GG\R66\certs\testsslnocert.jks</admkeypath>
        <admkeystorepass>testsslnocert</admkeystorepass>
        <admkeypass>testalias</admkeypass>
        <checkaddress>False</checkaddress>
        <checkclientaddress>False</checkclientaddress>
    </server>
    <network>
        <serverport>6666</serverport>
        <serversslport>6667</serversslport>
        <serverhttpport>8066</serverhttpport>
        <serverhttpsport>8067</serverhttpsport>
    </network>
    <ssl>
        <keypath>D:\GG\R66\certs\testsslnocert.jks</keypath>
        <keystorepass>testsslnocert</keystorepass>
        <keypass>testalias</keypass>
        <trustkeypath>D:\GG\R66\certs\testcert.jks</trustkeypath>
        <trustkeystorepass>testcert</trustkeystorepass>
        <trustuseclientauthenticate>True</trustuseclientauthenticate>
    </ssl>
    <directory>
        <serverhome>d:/GG/R66</serverhome>
        <in>in</in>
        <out>out</out>
        <arch>arch</arch>
        <work>work</work>
        <conf>conf</conf>
    </directory>
    <limit>
        <usefastmd5>True</usefastmd5>
        <fastmd5>D:\NEWJARS\gglib\win32\MD5.dll</fastmd5>
        <delayretry>10000</delayretry>
        <timeoutcon>10000</timeoutcon>
        <serverthread>8</serverthread>
        <clientthread>80</clientthread>
        <memorylimit>4000000000</memorylimit>
        <sessionlimit>8388608</sessionlimit>
        <globallimit>67108864</globallimit>
        <delaylimit>10000</delaylimit>
        <runlimit>10000</runlimit>
        <delaycommand>5000</delaycommand>
        <blocksize>65536</blocksize>
        <gaprestart>30</gaprestart>
        <usenio>False</usenio>
        <usecpulimit>False</usecpulimit>
        <usejdkcpulimit>False</usejdkcpulimit>
        <cpulimit>0.0E1</cpulimit>
        <connlimit>0</connlimit>
    </limit>
    <db>
        <dbdriver>h2</dbdriver>
        <dbserver>jdbc:h2:D:/GG/R66/data/openr66;IFEXISTS=TRUE;MODE=Oracle;AUTO_SERVER=TRUE</dbserver>
        <dbuser>openr66</dbuser>
        <dbpasswd>openr66</dbpasswd>
    </db>
</config>